TPU Samsung A22 Protective Case

A Samsung A22 phone case to protect the phone exterior printed in TPU that fits neatly around the phone chassis

A small amount of glue was applied to the satin finish build plate for adhesion purposes. No support material was used. However, the charging and headphone ports can sometimes have some poor bridging which can be removed with a sharp craft knife.

Printing Information

• 0.15mm (Quality) layer height.
• Printed on the satin build plate with glue stick applied to the surface.
• 0.4mm nozzle diameter.
• Filatech FilaFlex40 Filament was used (Default Prusa setting used for manufacturers filament)
• No Support material was used.

Happy Printing!!