Spool Holder based on the TUSH model for ¼" (6.35mm) ball bearings. These bearings are common in the US.
Printed in Overture PETG on a 0.6mm nozzle. Settings are based on the Mk3S/+ 0.6mm nozzle and Prusament PETG config.
I add additional perimeters for high strength prints - use 3-6 perimeters to get at least 1.5mm total perimeter width (3 for 0.6mm nozzle, 4 for 0.4mm, 6 for 0.25mm). The print will likely be solid anyways due to top/bottom layers.
The author remixed this model.