Hueforge The Hulk

Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm

Filaments Used:
PLA PolyLite Black Transmission Distance: 0.3
PLA PolyLite Steel Grey Transmission Distance: 1
PLA PolyLite Purple Transmission Distance: 0.5
PLA PolyLite Jungle Green Transmission Distance: 0.5
PLA PolyLite Pink Transmission Distance: 2
PLA PolyLite White Transmission Distance: 5

Swap Instructions:
Black until layer #14 at 1.2mm
Steel Grey until layer #16 at 1.36mm
Purple until layer #18 at 1.52mm
Jungle Green until layer #21 at 1.76mm
Pink until layer #31 at 2.56mm
White for the rest.