Vintage Photo HueForge

HueForge Vintage Photo created for the Polymaker Photo Color Set of Filaments. Only manual filament swap required.

Print at 100% infill with a layer height of 0.04mm with a base layer of 0.16mm

Filaments used Polymaker Photo Color Set:

• Polymaker PolyTerra PLA Charcoal Black Transmission Distance: 0.3
• Polymaker PolyLite PLA Natural Transmission Distance: 21
• Polymaker PolyLite PLA Grey Transmission Distance: 1
• Polymaker PolyLite PLA White Transmission Distance: 4

Swap Instructions:

• Start with PolyTerra Charcoal Black
• At layer #7 (0.4mm) swap to PolyLite Natural
• At layer #16 (0.76mm) swap to PolyLite Grey
• At layer #18 at (0.84mm) swap to PolyLite White for the rest.