Summoner Wars Box Insert

Contains space for up to twenty factions in sleeves, two separate containers for boost/damage tokens, a large box for dice, and two card racks. Room for a foldable dice tray!  The thick play board would cause some lid lifting.

Can be printed without supports at essentially any reasonable resolution. The main box insert is broken up into 12 pieces so some assembly is required. The connections between the side and middle walls are somewhat loose, but everything is held firmly in place by the dividers. You can add a small amount of glue to the frame if you feel it is necessary.

For the lids, I recommend using 9 parameters, 0 top and bottom layers, 15% hexagon infill.