Another Dimension HueForge

HueForge Another Dimension scene created for the Polymaker Professional Pack. Only manual filament swaps required.

Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm

Filaments used Polymaker Professional Pack:

• Polymaker PolyTerra PLA Charcoal Black Transmission Distance: 0.3
• Polymaker PolyTerra PLA Army Brown Transmission Distance: 0.3
• Polymaker PolyLite PLA Red Transmission Distance: 4
• Polymaker PolyLite PLA Lime Green Transmission Distance: 3.5
• Polymaker PolyLite PLA Lemon Yellow Transmission Distance: 6.5
• Polymaker PolyLite PLA Azure Blue Transmission Distance: 3
• Polymaker PolyLite PLA White Transmission Distance: 5
• Polymaker PolyLite PLA Natural Transmission Distance: 21

Swap Instructions:

• Start with PolyTerra Charcoal Black
• At layer #5 (0.48mm) swap to PolyTerra Army Brown
• At layer #6 (0.56mm) swap to PolyLite Red
• At layer #7 (0.64mm) swap to PolyLite Lime Green
• At layer #10 (0.88mm) swap to PolyLite Lemon Yellow
• At layer #12 (1.04mm) swap to PolyLite Azure Blue
• At layer #20 (1.68mm) swap to PolyLite White
• At layer #30 (2.48mm) swap to PolyLite Natural for the rest.