Abstract HueForge

HueForge Abstract I created for the Polymaker Color Pack of Filaments. Only manual filament swaps required.

Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm

Filaments used Polymaker Color Pack:

• Polymaker PolyLite PLA Azure Blue Transmission Distance: 3
• Polymaker PolyLite PLA Red Transmission Distance: 2.5
• Polymaker PolyLite PLA Lemon Yellow Transmission Distance: 6.5
• Polymaker PolyLite PLA Natural Transmission Distance: 21

Swap Instructions:

• Start with PolyLite Azure Blue
• At layer #5 (0.48mm) swap to PolyLite Red
• At layer #9 (0.8mm) swap to PolyLite Lemon Yellow
• At layer #20 (1.68mm) swap to PolyLite Natural for the rest.