Stone Carving HueForge

HueForge Stone Carving created for the Polymaker Nature Color Set. Only manual filament swaps required.

Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm

Filaments used Polymaker Nature Color Set:

• Polymaker Polyterra PLA Charcoal Black Transmission Distance: 0.3
• Polymaker PolyTerra PLA Army Brown Transmission Distance: 0.3
• Polymaker PolyLite PLA White Transmission Distance: 4
• Polymaker PolyLite PLA Jungle Green Transmission Distance: 0.5
• Polymaker PolyLite PLA Lime Green Transmission Distance: 3.5
• Polymaker PolyLite PLA White Transmission Distance: 4

Swap Instructions:

• Start with Polyterra Charcoal Black
• At layer #7 (0.64mm) swap to Polyterra Army Brown
• At layer #8 (0.72mm) swap to PolyLite White
• At layer #10 (0.88mm) swap to PolyLite Jungle Green
• At layer #12 (1.04mm) swap to PolyLite Lime Green
• At layer #17 (1.44mm) swap to PolyLite White for the rest.