Parrot HueForge

HueForge Parrot created for the Polymaker HueForge Red Starter Pack. Only manual filament swaps required.

Print at 100% infill with a layer height of 0.12mm with a base layer of 0.24mm

Filaments used Polymaker Red Starter Pack:

• Polymaker PolyTerra PLA Charcoal Black Transmission Distance: 0.3
• Polymaker PolyLite PLA Red Transmission Distance: 4
• Polymaker PolyLite PLA Pro Light Red Transmission Distance: 1
• Polymaker PolyLite PLA White Transmission Distance: 4

Swap Instructions:

• Start with PolyTerra Charcoal Black
• At layer #5 (0.72mm) swap to PolyLite Red
• At layer #9 (1.2mm) swap to PolyLite Light Red
• At layer #11 (1.44m) swap to PolyLite White for the rest.