Butterfly HueForge

HueForge Butterfly I created for the Polymaker Blue Start Pack of Filaments. Only manual filament swaps required.

Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm

Filaments used Polymaker Blue Starter Pack:

• Polymaker PolyTerra PLA Charcoal Black Transmission Distance: 0.3
• Polymaker PolyLite PLA Azure Blue Transmission Distance: 
• Polyaker PolyLite PLA Aqua Blue Transmission Distance: 2.5
• Polymaker PolyLite PLA White Transmission Distance: 5

Swap Instructions:

• Start with PolyTerra Charcoal Black
• At layer #9 (0.8mm) swap to PolyLite Azure Blue
• At layer #19 (1.6mm) swap to PolyLite Aqua Blue
• At layer #30 (2.48mm) swap to PolyLite White for the rest.