Washing Machine Drain Hose Holder

This drain hose holder was designed to work with a Mustee brand laundry sink (see photos), but will likely work with other laundry/utility sinks as well.

Requires the addition of two zip ties.

The holder is basically a screw clamp that fastens to the side of the laundry sink; zip ties inserted through the clamp hold the drain hose in place.

Assembly and Use :

Assembly and use it straightforward. Start the screw in the screw hole; place the clamp over the edge of the sink and tighten (do not over-tighten) just enough to hold the clamp in place). Place the drain hose in the groove and fasten in place with the two zip ties (see photos).

Print Instructions

I printed the two parts separately in PLA. Print using the 3mf files provided; otherwise :

Clamp :

• 0.2mmm layer height
• perimeters  = 3
• 15% gyroid infill
• organic (tree) supports

Screw :

• 0.2mmm layer height
• perimeters  = 3
• 15% Adaptive Cubic infill

CAD

The OnShape 3D CAD files for this are here :

https://cad.onshape.com/documents/0e48c11a04c4db2027115c47/w/b2743606e1ae9e4bf67cf1da/e/87baeac75059c553854839d9?renderMode=0&uiState=64b3ffe3daacca2840f18d97