This is an experimental device. Use with caution on your own risk.
The design has been made for the humidifier bottle with the diameter of 48mm.
Material: PETG
3D Printer: FDM 3D printer, average print time 15 hours.
Slicer settings: 0.3mm layer height, 5 perimeters, 40% infill (or more), supports on build plate
Post processing instructions: Clean stringing, remove supports. Connect two parts of the base using two M3x10 bolts and nuts. Attach to the wall and insert the cups.
The author marked this model as their own original creation.