Yeti Lid Organizer V2 | Holds 5 Yeti Lids and Magslider Magnets | Available for small, medium, or large lids

This 3D printed Yeti  Lid organizer is perfect for organizing 5 small, medium, or large yeti lids. There are versions for including either straws or magnets.

2.8" Lids are used on "small" drinkware, including 10oz Tumblers. For more information on different lid sizes please refer to https://www.yeti.com/drinkware/accessories/21070060010.html

3.5" Lids are used on "Medium" drinkware, including 20oz Rambler Tumbler. For more information on different lid sizes please refer to https://www.yeti.com/drinkware/accessories/21070060010.html

4.0" Lids are used on "Large" drinkware, including 30oz Rambler Tumblers. For more information on different lid sizes please refer to https://www.yeti.com/drinkware/drinkware-accessories/21070060010.html

- Both PLA and PETG can be used for this storage application, but please note that they should not be put in the dishwasher or washed in high temperature water as that may damage or deform the plastic (avoid very hot or cold areas in general). Reference for the food safety of 3D printed plastics: https://www.sculpteo.com/en/3d-learning-hub/3d-printing-materials-guide/food-safe-3d-printing-materials/ .

Print Settings I used:

• 0.6 mm nozzle
• 0.4 mm layer height
• 4 vertical shells (walls are 2.46mm thick for these preferences)