LITHOPHANE STAND BASE WITH DYNAMIC ANGLE FOR IKEA KAPPLAKE

LITHOPHANE STAND BASE WITH DYNAMIC ANGLE FOR IKEA KAPPLAKE

Nozzle: 0.4 mm

Layer height: 0.2 mm

Print speed: 40 mm/s

Infill: 20%

Supports: no

Filament used: ~15 grams

Print time: ~2h

Remark: The stand is suitable for litho models with a maximum width of 12 cm and a height of up to 15 cm. The litho model must not be thicker than 3 mm.