Scotts Edgeguard Mini Lawn Stripes Complete Fix

These printables fix a well-known design problem that exists with Scott's EdgeGuard Mini and other various versions of the broadcast spreaders. The design issue is the impeller sits below the wheels. This prevents the fertilizer from being thrown above the wheels of the spreader. The fertilizer meant to be flung far away, now gets stuck at the hollow wheels then drop straight down causing the stripes.

Print two spacers, two wheel covers and one shaft riser.

You are going to need 

• 2 of ¼ inch wide and at least 1 inch long (get 1.5 inches) carriage bolts with 20 tpi.
• 2 of ¼ inch flange nuts.
• Some glue to secure wheel covers.

https://www.buymeacoffee.com/CaptainMisclick

This video shows the problem: