The reliable Original Prusa MK4S is now available in discounted bundles with the MMU3 and Enclosure. Grab yours today!
3D Models Hobby & MakersOther Ideas

Advanced Air Duster

5 reviews
Useful for working in areas where you won't use a compressor, such as your coffee grinder.
30
154
6
742
updated July 15, 2023

Makes

Comments

Corbin1747 22
Corbin1747
@Corbin1747
Reply 1 like June 2 at 10:12 AM
Sovol SV01 Pro
vidision 31
vidision
@vidision

I like the lines on the remix. That said my TPU has been pretty well calibrated and prints reliably. The tapered tip printed irregular and top 7mm Just snapped off. I find the original more robust.

Reply March 12 at 3:25 PM
Bambu Lab P1P
maf 14
maf
@maf_512982

The nozzle was not hollow so I had to cut it down. Still works well and the air stream is directed enough. Amazon Basics TPU 95A white. (edited)

Reply 1 like January 30 at 3:34 PM
Prusa MK3/S/S+
Olivier Descornet 7
Olivier Descornet
@OlivierDescor_939817

TPU Amazon Basics, 0.2mm very cool !

Reply 1 like August 16, 2023 at 5:34 PM
Sovol SV06
Dan the 3D Printing Dad 21
Dan the 3D Printing Dad
@Danthe3DPrintingDad

Just wanted to drop in and say you made a great remix! 😊

Reply 1 like August 1, 2023 at 6:52 PM
CrAnKBrOtHeR89 16
CrAnKBrOtHeR89
@CrAnKBrOtHeR8_728670

@Danthe3DPrintingDad Thanks man! 😊

Reply August 6, 2023 at 1:01 AM
E 23
elcubano
@elcubano

Nice, quick print. Thanks for sharing.
Printed at 0.16mm with 0.4 nozzle. 100% infill. TPU could have dried a little longer.

Reply 1 like July 16, 2023 at 2:10 PM
Bambu Lab X1
Schaffer.la 20
Schaffer.la
@Schafferla

Printed with 0.4 nozzle (clearly 0.6 would have been better as the walls are rough) and 0.2 layer height. Fan speed at 100% from layer 300 and up, still had most of the pointy end occluded. Even so, it works.

Reply 1 like July 15, 2023 at 5:12 PM
Prusa MK3/S/S+
All comments loaded