Honeycomb Storage Wall Steam Deck Killswitch Adapter

Very rough model, just quickly modified in Windows 3D builder, but it works for me

Honeycomb Storage Wall adapter for dbrand Killswitch Steam Deck Case

I printed with small organic supports on the overhanging attachment points

BEFORE MOUNTING: Dry fit the adapter on the back of your Killswitch case, twist to lock/unlock repeatedly, and take unit off and blow out scrap that may have been scraped off. Repeat until motion is smooth. 

Layer Height: 0.2mm

Infill: 30%

Supports: Yes (hexagon overhang only)

Material: PLA+ (Normal PLA should work as well)

Be responsible, inspect your print and installation. I am not responsible for your steam deck.