Art Deco Fox - HueForge

There is a Fox theater in my town that is art deco, and I wanted to make an art deco fox.

It was made by using Midjourney, using the imagine of “art deco fox, drawing, sketch, blackwork, bold, isolated”.  The image was modified a bit to make the background transparent.  It was then put into HueForge and printed out.

Attached is the zip file with the HueForge Project.

Uses a 0.4mm nozzle.

Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm

Filaments Used:
PLA PolyLite Black Transmission Distance: 0.3
PLA PolyLite Steel Grey Transmission Distance: 3
PLA PolyLite Orange Transmission Distance: 14
PLA PolyLite Beige Transmission Distance: 3

Swap Instructions:
Black until layer #5 at 0.48mm
Steel Grey until layer #16 at 1.36mm
Orange until layer #23 at 1.92mm
Beige for the rest.