Early version: https://www.printables.com/model/363198-festool-built-in-thread-splinter-guard-sp-ts-55-r
CHANGES:
— The size of the thread has been increased (now the screw is wrapped more easily).
— The thickness of the body into which the screw is wrapped has been increased (there were cases of destruction on the early version).
— Some overhangs of the part have been changed (now you can print with supports only from the bed).
Fixing knob is here https://www.printables.com/model/384802-festool-bolt-knob
Printer brand: Flying Bear
Printer: Ghost6
Rafts: No
Supports: Yes (only bed)
Resolution: 0.2
Infill: 100%
Filament brand: Esun
Filament color: olive green (PLA+)
Filament material: PLA+
Slicer: Ultimaker Cura 5.4.0
Printing temperature: 220 Celsium
Build plate: 60 Celsium
Print speed: 60 mm/s
Fan speed 100%
Postprinting: The thread may be needs to be "driven" by a metal screw with lubricant, as the hole is slightly deformed when printing in the radial direction.
The author marked this model as their own original creation.