Geeetech Prusa i3 Pro B Bed Level Set

01/05/2020 Update:

I added a bigger screw and a rise for the Z level. Not sure about others but I always had problems that the screw was to short and difficult. With the rise there is now more space and the screw is easy to adjust.

For easy bed leveling I wanted a kit which makes it possible to level the bed with one hand and without tools. Also I didnt like the glas holder clips.

I added napalms lower bed level fix to the set. I used bernbouts new level clamps and added the fix part to fit the size of the i3 Pro B heat board. Finally I customized bertkatts knob to fit for my needs. The knob is so small that it wont be in the way when priniting and can also be used to turn the Z end stop screw.

I replaced all 4 corner screws and the Z end stop screw with a M3 hex bolt from here https://schrauben-expert.de/Sechskantschraube-DIN-933-M3-x-40-Edelstahl-V2A?curr=EUR&gclid=EAIaIQobChMIzMC32PTf5gIVwawYCh38fgGuEAQYASABEgLy4PD_BwE.

Its first work, hope you like it!

Print Settings

Printer:

Geeetech Prusa i3 Pro B

Rafts:

Doesn't Matter

Supports:

Yes

Resolution:

0.2

Infill:

30

Filament:

As you wish

Improved the way to handle it.