DJI (Mavic) Mini1/2 Camera Shade
Description
PDFI found the gap in the original design unnecessary as it just makes the great design less stable. I also made it 1mm longer so it fits better in place without vibrating. Finally I fixed the mesh and changed orientation.
Since I dont have the original file, the mesh looks still not perfect but you can print it in place and get a perfect fitting stable camera shade that also protects the camera from slight crashes.
Special thanks to @MagicFred, the original designer.
Print Settings
Printer:
Sapphire Plus
Rafts:
No
Supports:
Yes
Resolution:
.12
Infill:
0%
Filament:
eins3D ABSBlack
Notes:
I printed this in ABS which is light but stable. I used only walls and no infill. Print it as it is and make sure to only print supports as in the picture.
Tags
Model origin
The author remixed this model. Imported from Thingiverse.
Differences of the remix compared to the original
I found the gap in the original design unnecessary as it just makes the great design less stable. I also made it 1mm longer so it fits better in place without vibrating. Finally I fixed the mesh and changed orientation.