Hero Me Quick Change for Prusa i3 Pro B

I made a mount for my own redesign of the great work from mediaman for my Geeetech i3 Pro B.

I am using the quick tool change design I also recreated here: https://www.thingiverse.com/thing:5226203. With that I can change quickly between hotends or other tools.

You will need to mount the X endstop a little more to the left if you use my back mounted BLtouch holder as it would hit the frame otherwise. I use mainly M3 bolts and nuts but for the hotend I prefer "hot inserts". The holes should be suitable to get them in easily. The holes for the fan are kept from the original design, the bolts should fit perfectly. The additional bracket on top of the design are for a direct drive module to print flexible materials.

If you enjoy this it would be great if you could give me feedback in the comments, a like and post a make if you did this.

Print Settings

Printer:

Geeetech i3 Pro B

Rafts:

No

Supports:

Yes

Resolution:

0.2

Infill:

40%

Filament:

As you wish

Made the Hero Me fitting for i3 together with the quick tool change.