5v 10amp PSU and ESP32 box.
Made a small box to contain a 5v 10amp power supply, and an ESP32 to run WLED.
2
15
0
169
updated July 14, 2023
Description
PDFThis will be a tight fit once all together. I cut out holes for an IEC panel mount power input, and a 3 pin 16mm aviation plug so that the power input wires, and the WS2812b power and signal wires can be easily attached and detached. The lid can be attached to the body with 1 m3 screw in each corner.
Model origin
The author marked this model as their own original creation.
