HueForge Pixar Boy

AI created artwork of a Pixar style boy, processed with HueForge software, and printed on a Bambu Lab X1C printer using the following setttings:

Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm

Filaments Used:
Sunlu PLA Black Transmission Distance: 0.3
Inland PLA Silver Transmission Distance: 2.5
Overture PLA White Transmission Distance: 3

Swap Instructions:
Black until layer #5 at 0.48mm
Silver until layer #10 at 0.88mm
White for the rest.