Grill Kit Card

The wedges keep the structure of the model compact.

The edges used are multiples of 0.4 mm long. Sharp ends R0.2mm.

I invite you to a barbecue in the sense that you will place photos from the print on the website of this project.

I added the kit cards for resin printing.
You can additionally choose a large grill grate or 3 x small grate.

(August 10, 2023) The same elements in a new arrangement for a kid card

Following suggestions from the comments, I prepared new card layouts:
 

• PKK-008-2-005-A-01
• PKK-008-2-005-A-02

In PKK-008-2-005-A-01 I added a small grill grate (3 pieces) to the set of cards.

W PKK-008-2-005-B-01 - has the same components as the entrant card set from the first edition and does not include the grill for the small grill - less waste for those who only use the large grill.

Let me know if the pieces are too loose in the frame. On most elements, I limited the mounting points to two and placed them so that traces of their disassembly were not directly visible on the assembled model. And I reduced them to a width of 1.2 mm at the elements.

Think of the middle item with the description GRILL as a mega beef steak.

Set kid kards (August 10, 2023) can be painted in its entirety and then cut or twist and break the elements and assemble the grill model and requires almost no repainting.

WARNINGS:

1. Not suitable for children under 3 years old.
2. Wear safety glasses when cutting plastic.
3. Do not cut plastic when other people are nearby as the shards may injure them.
4. Don't let the hamster devour the grill - unless you get along and print from products that are healthy to devour.