Pet feeder / dispenser

Require two long M3 screws for motor and base mount, and one M4 to mount main part and bearing with external diameter 16mm and internal 5mm. 

My motor (5V version) require exactly 1024 steps to move to next slot.

Printing hints:

• Thin elements are designed to print with line width 0.56mm.
• Enable ironing for dispenser_bottom.
• dispenser_cap is designed to print in vase mode with 0.8mm line width.
• dispenser_gear has a minimum distance from motor mounting bolts, so you need to pay attention when turning so that there is no collision.