Fanatec CSL & CSL Elite Pedal Loadcell Brake mod

My mod is greatly inspired by some commercially available one but I've modeled it myself from the ground up and took the liberty of adjusting it to my liking.

This mod will make the braking more linear and less stiff overall which is what you want for anything that is not GT/F1 racing. 

I've found that the following print settings work the best for this:

• 4 perimeters
• 0% infill
• 5 top & bottom layers

The TPU I used is this one: https://amzn.eu/d/6iyGx0R (probably also available in the USA)

Printed at ~50mm/s @ 210°C Hotend & 55°C Heatbed