18mm Drone Skid for Kit

This is a remix for https://www.thingiverse.com/thing:4002006

Needed a skid that was taller to clear some screws that were sticking out of the bottom of a drone kit. The skid is 18mm tall and uses M3 x 12mm screws that go into your motors. I believe M3 x 14mm will also work.

It will fit this drone kit frame. I'm not sure what standard spacing those hole sizes are on this kit, but it fits this:

https://usa.banggood.com/STEELE-5-220mm-Wheelbase-5mm-Arm-Thickness-Carbon-Fiber-X-Type-5-Inch-Freestyle-Frame-Kit-Support-Caddx-Vista-HD-System-for-RC-Drone-FPV-Racing-p-1720420.html?imageAb=1&akmClientCountry=America&cur_warehouse=CN

Print Settings

Printer Brand:

TEVO

Printer:

Tornado

Rafts:

No

Supports:

No

Resolution:

.25mm

Infill:

20%

Filament: Matterhackers PETG Orange

Notes:

I printed with 4 walls, about 4 bottom and 12 top layers. I wanted the top area (the area that ends up touching the ground to be pretty solid.