MOZA SRP to Playseat Challenge Adapter [Updated]

Update to the latest version of this model. Someone asked if there was a way to make this without having to take the tubular frame apart. I've made a new version with a hook instead of a full circle.

I'm also still working on a way to better mount the rears of the pedals. See my current WIP blocks. Advice is more than welcome.

Both the plank and the blocks will use the included stubby M8 screws that self tap into the hole. More than finger tight will just bore out the thread, so watch out.

Material: PLA works

Resolution: 0.6mm*0.15mm (0.4mm nozzle)

Walls: 3 (alternate extra)

Infill: Cubic 18%?

Supports: No

Brim: Maybe

High temp with minimal cooling for strength