Airplane Ornament

This is a Christmas Ornament in the shape of a jet airplane in the style of my high-school logo.

I printed all of mine in PETG for a little higher heat tolerance and flexibility, but any filament should be fine.  I plan to try a silver/gold PLA later.

Print 2 copies & super-glue them together, back-to-back.  I used 7 clothespins to clamp them while the glue dried and set overnight.  A gold thread to hang it with is the only other thing you'll need, but you can optionally get some glitter paint and sealer to add some sparkle to the ornament as shown.

You can find my original OnShape document for the model at the following link:

https://cad.onshape.com/documents/cca9917991f5d54843371a82/w/3a13c6b82542a302c826da72/e/9ed49442ab98dad8d4d06bbf

NOTE:  I have another listing for an Airplane Cookie Cutter based upon the same design.
(One of the pictures shows the Handle being glued to the Inside Embosser.)

Cheers!

&

Always Be Printing