Micro Saul2

Printed parts should be uploaded in the correct orientation to print. Check images for fan duct orientation, assembly and built in support locations.

Be careful what fans you buy. The gdstime 4010s work flawlessly but the fabreeko hb 4010s have a larger diameter fan blade and they stick out of the housing a couple mm. During homing they scrape the xy joint so I just disable them while it's homing x. My single part pins mod for the xy joints includes the necessary cutout.

Mainsail theme sidebar included

Bom: bom-assembly.jpg
1: 2x M3x25
2: 2x M2.5x20
3: 2x M3x25
4: 2x M3x12
5x Voron standard M3 heatset insert
-----------------------------------------

Fan mounting from XOL2 kit: bom-2.png
1: 4x M2x12
2: 2x M2x8
3: 2x M2x20 (can be trimmed to 14mm
8x M2x4Lx3.5od

OR

Fan mounting self source: bom-2.png
1/3: x6 M2x12
2: x2 M2x6
8x M2x4Lx3.5od
 

Xol 2 ducts and front face modified to fit the V0.2. Shout out to Timlogy for the original idea! Sherpa is unmodified but I've included the link as that's the extruder this toolhead was designed around.