Yolonata - Y6 Variant of the Odonata HD Freestyle Drone

Frame files for the Yolonata - Y6 Variant of the Odonata HD Micro Freestyle Drone by Craftedkwads.

Frame Parts list:

• 1x Top_plate.dxf 2.5mm
• 1x Botom_plate.dxf 2.0mm
• 3x Motor_plate.dxf 2.0mm
• 3x M2x25mm aluminum standoffs
• 12x M2x4mm screws
• 12x M2x6mm screws
• 6x M2 nuts

Build list:

• 6x 9x9 motors - recommended 1202.5 5500kv for 4s, 1202.5 7000kv for 3s
• 6x 2" propellers - recommended Gemfan Hurricane 2023
• 1x 16x16 Hex ESC
• 1x 16x16 Flight controller
• 1x 20x20 Vtx - recommended Naked Air Unit lite (Caddx Vista, Runcam Link)
• 1x 14mm Camera - recommended Caddx Nebula Pro Nano

Build notes:

My build used the electronics from a Flywoo Firefly Hex Nano HD. The frame is designed to bottom-mount the battery. For the Vista antenna, I used a linear dipole antenna zip-tied to the frame. Alternatively, you could probably mount an antenna to the top plate.

Files for camera mount can be found on Craftedkwads OdonataHD page.

Contact Craftedkwads to get the frame cut.

Credit to Cathodd for the name. Odonata Y6… Yodonata… nah Yolonata.