Ghost Holster mount extension, specifically for large metal pistols, with anti-cant support.
A replacement for the base plate for civilian Ghost holsters (Civilian 3G and 3G Elite) that use the Clip D. Makes them more suitable for IPSC or other shooting competitions. Makes the holster much harder to cant during a draw or when using a metal frame pistol.
Needs original screws and other mounting hardware, as well as a 12mm M4 bolt and M4 nut to mount the blob.
Best printed out of stiff, resistant filaments, with 0.1 or 0.2 mm layers, at least 4 perimeters and 50% or higher infill. Print with supports for the main bolt hole and the blob mounting slot.
To use, print 1x base plate (either long or short), 1x blob and 3x spacers. Spacers have to be glued to underside of the baseplate, to offset the holster from the base slightly.
The author marked this model as their own original creation.