Spice Rack - Parameterized

This is a remix of another spice rack I found here; everything should be customizable by user parameters in Fusion 360.

included stl files are for reference, adjust the sizes based on your hardware and space in Fusion 360 and export your own stl files.

Parameters are grouped by prefix, to search for parameters of a particular part, search for the prefix.

Some useful customizations:

• Shelf_All_*** - Settings that apply to all the shelves.
  • Shelf_All_Inside_Length - Inside capacity, outside is a bit longer (see Total_Length)
  • Shelf_All_Inside_Width - Inside capacity, outside is a bit wider (see Total_Width)
  • Shelf_All_Corner_Radius - Adjusts the roundness of the shelves, depending on type of jars you use, you might want to adjust this.
  • Total_Width/Height/Length - Calculated values, make sure it fits your space.
• Shelf_Bottom_*** - Bottom shelf parameters
• Shelf_Top_*** - Top shelf parameters
  • Shelf_***_Inside_Height - Inside capacity
  • Shelf_***_Edge_Inside_Height - Height of the side edge
• Base_Screw_*** - Base screw holes, adjust depending on screws you want to use.
• Washer_*** - Double check to make sure it matches your hardware.
• Binding_Post_*** - Double check to make sure it matches your hardware.
• Slider_Top_Column_Width/Count - These adjust the columns that are in slider floor, changing this will affect the weight slider can handle.
• Unsuppress the last two extrusions to get solid shelf bases.

Changes:

V4 - Bunch of issues with sizing are fixed, there is a tall shelf, which is the bottom shelf cut in half so an extra tall shelf can fit in the printer.

V3 - Stronger connection between the shelves (the little posts kept breaking on me)

V2 - Fixed issues with resizing

V1 - Original version