Customizable ink stamp (print in place, no supports necessary)

Here is a modular stamp with which you can create or personalize your own greeting cards, birthday, anniversary or much more. I have also used it to create original packaging for a product to give as a gift, the only limit is your imagination! 

Printer Settings:

• Layer: 0.2
• Infill: 15% Gyroid
• Material: PLA 
• Walls: 2 or 3 

Following are some tips: 

1. Print stamps without support with the text facing up, it will be easier for supports.
2. For text, it is best to choose fonts that are not too thin to avoid problems with slicing.
3. The 2mm high text works well.
4. As colors for the stamps I used regular acrylic colors, you can choose whether to spoil the color on a flat surface and then impregnate the stamp or with a brush or sponge pass the color directly on the stamp. I prefer the second solution.

I have uploaded the "blank_stamp.step" file of a stamp without text so you can customize it with your lettering.

For those unfamiliar with using CAD software i have uploaded the file: “stamp_blank_large” and then you can write and cut it to the size that you need. Many slicers, such as Prusa Slicer or Bambu Studio allow you to do these operations.

Have fun with your stamps!