Propeller Drilling Jig for 2mm Shafts

Propeller Drilling Jig for widening 1.5mm shaft propellers to 2mm for FPVCycle 2mm shaft motors.

• Use Top19 Bottom19 for 1.9mm drill bits
• Use Top20 Bottom20 for 2.0mm drill bits
• Use Top21 Bottom21 if your printer has lousy calibration like mine

You will also need 2x 12mm M2 screws.

I've only tested with Fpvcycle 13mm motors, Gemfan Flash 2540, and a 2.0mm drill bit. YMMV.