Wyze Cam V3 Wall Mount

This is a wall mount and housing for the Wyze Cam V3. The camera screws into the housing with the screw that came with it, just without the bracket.

You can paint this to match the color of the wall where it will be mounted. I printed this with PLA+ and I'm going to see how long it lasts outside in the sun, protected by paint and primer, before trying a stronger plastic.

The mount screws into the wall first, then the housing pops onto it with the camera mounted inside. Pass the USB power cable through a hole in the wall. There is a drain hole at the bottom of the housing so water will not be trapped.

Print the housing with the face down and minimal supports are needed.