Voron 2.4 Z Chain Vertical Support

Occasionally, some movements would snag the umbilical on the Z cable chain, pulling it forward.  This adds another support point to keep it upright.  Secures to the chain with a zip tie.

After installing, check that your gantry can still travel its full height.  This slightly changes the flex point of the chain.  You may or may not need to add an additional link or two to the length of your chain for the full range of travel.

Use an m5 screw to secure to the gantry.  Sized to fit just above an umbilical mount.

now fits above an umbilical mount