UniFi G3 Flex Magnetic Base

Tired of having to re-adjust your surface mounted UniFi Protect G3 Flex camera? This model is my solution! While the magnets are not strong enough to hold it onto a vertical surface, they will keep it stable if bumped, or (in my case) the metal cabinet it sits on in the garage is opened and closed. The slightly larger base also helps with stability even on non-ferrous surfaces.

Additional Required Parts:
(5x) 3mm x 2mm Magnets  -  Amazon Link 

Instructions:
Print in the normal orientation, flat side down. No supports required. After printing, simply press the 5 magnets into their holes on the bottom side.

Printed in Hatchbox PETG

I realize it's kind of a unique issue, but hopefully it helps someone else out there. Happy Printing! 🙂