UTOC Mount for Voron DIN Pcb clip

Mount for Mellow UTOC, that fits the Voron 2.4 pcb din clip

you also need to print the Voron pcb din clip. its located in the voron 2.4 folder here: Voron-2-Voron2.4\STLs\Electronics_Bay

BOM:

M2x10 selftapping x2

M3x6 or M3x8 BHCS or SHCS x4

Printing Guide:

Use Voron spec settings with 4 perimeters, and 40% infill, and dont print it in PLA

Usage:

Print this and screw it to the voron pcb din clip with the M2x10, then mount the UTOC using the rest of the bolts.