Hexagon Shelf Display Borders

As my collection of mini Funko Pops figures grow, so does my hexagon display wall.  I wanted to clean up the outside edging, therefore these boarders were created. But depending on which version of Hex Display you are using, you may need to scale the Z-axis.

The dimensions of a single full length border (for reference): 44.25mm wide, 32mm tall, 4.15mm thick.

You will need “cut” borders for the inside corners of your wall display:
1cut=one of the ends is a reverse angle 
2cut=both ends are reverse angles

Tip: It looks better when using the same color & spool as the hex stand you are bordering.