Rook 2020 Mantis Toolhead with CPAP Fan Duct

***Please be aware that I did this mod on my Rook 2020 that is using 250mm for the Z Extrusions and Rods.  My build volume is 120mm(x), 120mm(y), and 155mm(z).  I'm not sure how it affects the Z if the mod is applied on a stock Rook 2020.

• Toolhead can take a Sherpa Mini or Sailfin extruder.
• Remixed the Mantis MGN9 X Rail Mount to be used on MGN9C
• Remixed the Y Carriage Mounts for clearance of the Mantis X Rail mount
• Remixed Top Z Rod Mounts for clearance of the Mantis X Rail mount
• Remixed Wishbone Mantis CPAP Part Cooler by TX_Ryan to allow for use of Triangle Labs CHC Pro or Rapido HF hotend
• Remixed the Mantis hotend mount (heatsink holder) for clearance of the CPAP part cooler duct
• Created a CPAP tube mount that sits in the 120mm blower fan
• Mantis X Rail mount is Klicky probe ready.  I included the probe I used that works with the TLCHC Pro or Rapido HF hotends.
• Remixed the Mantis Klicky probe dock to fit the Rook 2020 form factor
• Remixed the Mantis Belt Lock to work with the X Rail mount mod.
• Created a Mantis Wire Harness arm to take an extended EVA 2.4.2 cable mount