Resin Filter for my Funnel

I've designed a filter plate or adapter for my stainless steel funnel. This is a funnel which is sold by Amazon under the number (B0922B5J3G) in multiple countries (e.g. in Germany: https://www.amazon.de/dp/B0922B5J3G).

The handle of the filter cover the handle of the stainless steel filter insert (sold with the funnel) whose mesh size was too large for me. The handle hole has a diameter of 5.6mm to cover the metal pin.

Used PLA <2g <10min. print time.

Important in the slicer: If you use the .stl

Nozzle 0.4; no bottom and top layers! Infill: I use rectilinear infill and density of 75%.

In the last days I've used a new resin which was more viscous than the previous. For this resin I had to lower the density down to 45%