NR200 AIO Tophat

This is a remix of naturalnetworks 'Cooler Master NR200 Case Top Hat Spacer' I would have added the remix in the proper way but Thingiverse is broken again...

This tophat is designed with EK 240 D-RGB AIO in mind, with a rad thickness of 27mm.

The tophat is split in two and I recommend a print bed size of minimum 300mm.

I usually print all my PC parts in PETG because of the heat, but PLA is fine here.

The tophat is screwed down to the chassis of the case with 4 long M3 bolts.

The Fans and rad are both screwed down to the top panel together, and then the top panel clips down onto the tophat.

Print Settings

Printer Brand:

Creality

Printer:

CR-10

Rafts:

No

Supports:

Yes

Resolution:

0.1000

Infill:

20

Filament: 3DE Premium PLA