Ultrasonic Fogger Floater for Fogponic / Aeroponic Gardening

This model floats in water to allow for optimal water delivery of up to 4 ultrasonic foggers. Can be used for gardening.
20
42
0
770
updated July 3, 2023

Description

PDF

Hello and welcome,

this model is designed to float on water and to provide optimal water delivery for up to 4 ultrasonic foggers (16/20mm ceramic piezeo). This can be used in a fogponic setup to grow e.g. different types of lettuce.

(Parts: 2 Ultrasonic fogger driver boards, 4 piezeo elements and 4 foam straws) 

(Source: Aliexpress “Ultrasonic Fogger Driver”)

 

Assembly:

  1. Cut the foam straws in half and stuff them into the inserts of the floater. It is designed to have a tight fit, so that the foam staws will not fall out.

2. Test fit the piezeo elements. Make sure that they fit in the socket and have light contact with the foam staws. The contact to the foam staw is important for high amounts of fog.

3. Add wiring and make it waterproof(ish) with shrink tubes.

4. Add cover and M4 bolts.

5. Connect wires to driver board. Place floater in water and let the foam staws pull water for about 10 minutes. Power the driver board and adjust the foam staws, so that a lot of fog is produced.

 

(6. Add deflectors to reflect the fog stream and to create a vortex)

Tags



Model origin

The author marked this model as their own original creation.

License


Highlighted models from creator

View more