The PRUSorganizer

This is a pen's, notebook's, ruller's, srewdriver's, bolt's, screw's, scissors... holder. And all this with the letters from the company that brings us together here in this contest! That is printed in 3 parts:

• The PRU
• The SA
• The Drawers.

Quite easy to print, can be printed with supports but it is not essential.
You can also run your desktop cables underneath the letters so that they don't get mixed up.
There is also a slot in the A to put rulers or cards but it is not on the printed template.
Now you can choose if you want to put it on your desk or on your workbench...
New, I fixed some bugs in the 3d file

Print instructions

I printed it with PLA. On the 3mf file, there are my settings but you can change them depending on your printer. You can put support for the PRU and SA but I didn't think that it is essential.
On the other hand, it is necessary to put some for the printing of the drawers. I printed everything in 20% fill but to save filament, it is possible to print it in 15%.
Happy printing!