South Park Pinball Warning Sign Surround

This is a surround I printed so that I could back light the warning sign topper on my South Park pinball machine. I used #4 sheet metal screws to secure the sign to the mounting posts. On two of the posts the screw was a bit tight and I had to clear it with a drill bit first. If you paint the screws black they blend right in. The lights are 12v RGB strips with a controller I had lying around but strait white would look good too.

Print Settings

Printer Brand:

Creality

Printer:

CR-10

Rafts:

No

Supports:

No

Resolution:

.2

Infill:

20