Hueforge - Space Man

Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm

Filaments Used:
PLA ENVLAS Black Transmission Distance: 0.3
PLA ENVLAS Red Transmission Distance: 1.5
PLA ENVLAS BL/GRN/RED Transmission Distance: 1.5
PLA ENVLAS Grey Transmission Distance: 2
PLA ENVLAS Grey Transmission Distance: 2
PLA ENVLAS Yellow Transmission Distance: 5
PLA ENVLAS BL/GRN/RED Transmission Distance: 1.5
PLA ENVLAS Grey Transmission Distance: 2
PLA ENVLAS BL/GRN/RED (Tri-Color) Transmission Distance: 1.5
PLA ENVLAS Marble Transmission Distance: 5

Swap Instructions:
Black until layer #6 at 0.56mm
Red until layer #7 at 0.64mm
BL/GRN/RED (Tri-Color) until layer #8 at 0.72mm
Grey until layer #9 at 0.8mm
Grey until layer #11 at 0.96mm
Yellow until layer #12 at 1.04mm
BL/GRN/RED (Tri-Color) until layer #13 at 1.12mm
Grey until layer #15 at 1.28mm
BL/GRN/RED (Tri-Color) until layer #18 at 1.52mm
Marble for the rest.