Lightweight 4010/5015 fan and 3DTouch mounter for Kingroon KP3S

We've designed the lightweight mounter for the 4010 Hotend Fan, 5015 Section Fan, and 3D touch to the Titan Extruder model and share it. The sensor layout we have to describe in robin_nano_cfg.txt of the 3D-touch compatible firmware assumes follows.

Z_PROBE_OFFSET_FROM_EXTRUDER -2.0 # Z 偏移: -below +above [the nozzle]

X_PROBE_OFFSET_FROM_EXTRUDER 22.0 # X 偏移: -left +right [of the nozzle]

Y_PROBE_OFFSET_FROM_EXTRUDER 0 # Y 偏移: -front +behind [the nozzle]

In addition, the firmware for 3D Touch often does not update the value of e-steps for KP3S 3.0 titan extruder, so it is recommended to check and update the value as follows.

DEFAULT_E0_STEPS_PER_UNIT 764 #E轴默认脉冲 (steps/mm)

After that, I designed a lighter fan cover, so if you are interested, I would be grateful if you could take a look. https://www.thingiverse.com/thing:5249055

[Related upgrade parts for Kingroon KP3S]

Kingroon KP3S full assembly STP/OBJ data https://www.thingiverse.com/thing:4889303

Lightweight spool-holder v23 for Kingroon KP3S, Aquila & Ender3 https://www.thingiverse.com/thing:4889506

Holder PSU for Kingroon KP3S https://www.thingiverse.com/thing:4889524

Raspberry Pi mounter for PSU of KP3S, Ender3 Pro etc. https://www.thingiverse.com/thing:4901825

Raspberry Pi Camera mounter for PSU of KP3S, Ender3 Pro etc. https://www.thingiverse.com/thing:4906048

(In Japanese)

Titan Extruderモデルにおいて4010 Hotend Fan と 5015 Section Fan, 3Dtouchをミニマルに固定するマウンターを設計したので共有致します。 3D-touch対応firmwareのrobin_nano_cfg.txtに記載するセンサ配置は下記を想定しています。

Z_PROBE_OFFSET_FROM_EXTRUDER -2.0 # Z 偏移: -below +above [the nozzle]

X_PROBE_OFFSET_FROM_EXTRUDER 22.0 # X 偏移: -left +right [of the nozzle]

Y_PROBE_OFFSET_FROM_EXTRUDER 0 # Y 偏移: -front +behind [the nozzle]

また3D Touch用ファームウェアはKP3S 3.0 titan extruder用にe-step数を更新していない事が多く、下記も確認の上で数値更新がお勧めです。

DEFAULT_E0_STEPS_PER_UNIT 764 #E轴默认脉冲 (steps/mm)

参考サイト：3D Touchで自動ベッドレベリング – KINGROON KP3S情報 http://hitoriblog.com/kingroon_kp3s/docs/how_to_do_automatic_bed_leveling_with_kingroon_kp3s/

その後より軽量なファンカバーもデザインしたので興味を持って頂いたらこちらも見て頂けると嬉しいです。 https://www.thingiverse.com/thing:5249055

cf. Imported from the following on 2023.07.02.
https://www.thingiverse.com/fukumay/designs