{"data":{"model":{"id":"517947","slug":"print-head-fy41-for-kingroon-kp3s","name":"Print head fy41 for Kingroon KP3S","authorship":"remix","club":false,"excludeCommercialUsage":false,"price":null,"eduProject":null,"ratingAvg":"0","myRating":null,"ratingCount":0,"description":"

I designed and shared a lightweight print head mounter to fix V6Hotend, Sherpa-mini, 3010 Hotend Fan, 5015x2 Section Fan and Panasonic GX-H8A or B Probe for Kingroon KP3S. An X belt tension adjustment mechanism, X head position fine adjustment mechanism, and acceleration sensor board mounting hole are also provided on the back of the print head.

Some parts are M3 tapped, so we recommend purchasing a tap drill set even if it is inexpensive.
Reference URL(JPN): https://amzn.to/43nC3Xj
Processing example: https://www.youtube.com/watch?v=5AMY5ZxE_U4

It seems that the following screws are used except for the Sherpa-mini part, so I designed it so that it can be distributed and covered with a general button bolt set.
Reference URL(JPN): https://amzn.to/445JB20
M3x8 3pcs
M3x10 4pcs
M3x12 1pcs
M3x14 2pcs
M3x16 4pcs
M3x18 6pcs
M3x20 5pcs
M3nut 3pcs
M3insert nut 5pcs

The description of [probe] on Klipper by attaching Panasonic GX-H8A or B is as follows.
Reference URL(JPN): https://www.monotaro.com/p/4711/0427/

[probe]
## Inductive Probe - If you use this section , please comment the [bltouch] section
pin: ^!PC4 # Added \"!\" for non-proximity ON, no ! for non-proximity OFF. ^ is a pull-up specification (when turned ON - connected sensor)
x_offset: 0 # X distance between nozzle and sensor
y_offset: -19.4 # Y distance between nozzle and sensor
samples: 2 # number of samples for each point
samples_result: median # how each sample is calculated: median=median, average=average
sample_retract_dist: 1.0 # Height (mm) to lift the tool head between each sample. Detection does not turn off unless distance is taken by the sensor
samples_tolerance: 0.006 # Tolerance between samples (mm). Retry operation when the variation exceeds this value.
samples_tolerance_retries: 2 # number of sample retries
z_offset: 1.2 # Increasing the value moves the nozzle closer to the bed.

For details on installing probes, please refer to Eitoku's article below.
(JPN) https://note.com/eitoku_note/n/n0dcc3f176f32

Moyashi's article below is recommended for adjusting Klipper using the accelerometer.
(JPN) http://hitoriblog.com/kingroon_kp3s/docs/tuning_klipper_using_an_accelerometer/

Kishi Sangyo's article below is recommended for the entire review of Klipper's printer.cfg.
(JPN) https://note.com/tcbjr8d/n/nf9b6892c5f1a

For the Sherpa-mini part, he will be a wonderful extruder created by Annex-Engineering. Please refer to the following for reference, reuse, and redistribution of various data such as 3D data.
You should must use the short arm.
https://github.com/Annex-Engineering/Sherpa_Mini-Extruder
https://store.annex.engineering/
https://discord.gg/MzTR3zE
https://github.com/Annex-Engineering/ANNEX-Engineering-License-Agreement/blob/main/LICENSE.md

(Original Japanese)
Kingroon KP3S\u306b\u5bfe\u3057 Dragon Hotend, Sherpa-mini, 3010 Hotend Fan \u3068 5015 Section Fan, Panasonic GX-H8A or B Probe\u3092\u56fa\u5b9a\u3059\u308b\u8efd\u91cf\u306a\u30d7\u30ea\u30f3\u30c8\u30d8\u30c3\u30c9\u7528\u30de\u30a6\u30f3\u30bf\u30fc\u3092\u8a2d\u8a08\u3057\u305f\u306e\u3067\u5171\u6709\u81f4\u3057\u307e\u3059\u3002\u30d7\u30ea\u30f3\u30c8\u30d8\u30c3\u30c9\u80cc\u9762\u306bX\u30d9\u30eb\u30c8\u30c6\u30f3\u30b7\u30e7\u30f3\u8abf\u6574\u6a5f\u69cb\u3068X\u30d8\u30c3\u30c9\u4f4d\u7f6e\u5fae\u8abf\u6574\u6a5f\u69cb\u3001\u52a0\u901f\u5ea6\u30bb\u30f3\u30b5\u57fa\u677f\u53d6\u4ed8\u7a74\u3092\u8a2d\u3051\u3066\u3044\u307e\u3059\u3002

\u4e00\u90e8M3\u30bf\u30c3\u30d7\u52a0\u5de5\u7b87\u6240\u3042\u308a\u5b89\u4fa1\u306a\u3082\u306e\u3067\u3082\u30bf\u30c3\u30d7\u30c9\u30ea\u30eb\u30bb\u30c3\u30c8\u306e\u8cfc\u5165\u3092\u304a\u52e7\u3081\u3057\u307e\u3059\u3002
\u53c2\u8003URL\uff1ahttps://amzn.to/43nC3Xj
\u52a0\u5de5\u4f8b\uff1ahttps://www.youtube.com/watch?v=5AMY5ZxE_U4

Sherpa-mini\u90e8\u5206\u3092\u9664\u304d\u4e0b\u8a18\u306d\u3058\u3092\u4f7f\u3063\u3066\u3044\u305d\u3046\u3067\u3059\u3001\u4e00\u822c\u7684\u306a\u30dc\u30bf\u30f3\u30dc\u30eb\u30c8\u30bb\u30c3\u30c8\u3067\u5206\u6563\u30ab\u30d0\u30fc\u3067\u304d\u308b\u3088\u3046\u8a2d\u8a08\u3057\u3066\u307f\u307e\u3057\u305f\u3002
\u53c2\u8003URL\uff1ahttps://amzn.to/445JB20
M3x8 3pcs
M3x10 4pcs
M3x12 1pcs
M3x14 2pcs
M3x16 4pcs
M3x20 5pcs
M3nut 1pcs
M3insert nut 4pcs

Panasonic GX-H8A or B \u3092\u53d6\u308a\u4ed8\u3051\u308b\u4e8b\u306b\u3088\u308bKlipper\u4e0a\u3067\u306e[probe]\u8a18\u8f09\u306f\u5f53\u65b9\u4e0b\u8a18\u3068\u3057\u3066\u3044\u307e\u3059\u3002
\u53c2\u8003URL\uff1ahttps://www.monotaro.com/p/4711/0427/

[probe]
## Inductive Probe - If you use this section , please comment the [bltouch] section
pin: ^!PC4 #\u975e\u8fd1\u63a5ON\u306f\"!\"\u8ffd\u52a0\u3001\u975e\u8fd1\u63a5OFF\u306f!\u306a\u3057\u3002^\u306f\u30d7\u30eb\u30a2\u30c3\u30d7\u6307\u5b9a(ON\u3059\u308b\u3068\uff0d\u63a5\u7d9a\u3055\u308c\u308b\u30bb\u30f3\u30b5)
x_offset: 0 #\u30ce\u30ba\u30eb\u3068\u30bb\u30f3\u30b5\u306eX\u8ddd\u96e2
y_offset: -19.4 #\u30ce\u30ba\u30eb\u3068\u30bb\u30f3\u30b5\u306eY\u8ddd\u96e2
samples: 2 #\u5404\u30dd\u30a4\u30f3\u30c8\u306e\u30b5\u30f3\u30d7\u30eb\u6570
samples_result: median #\u5404\u30b5\u30f3\u30d7\u30eb\u306e\u8a08\u7b97\u65b9\u6cd5: median=\u4e2d\u592e\u5024\u3001average=\u5e73\u5747\u5024
sample_retract_dist: 1.0 #\u5404\u30b5\u30f3\u30d7\u30eb\u9593\u306e\u30c4\u30fc\u30eb\u30d8\u30c3\u30c9\u3092\u6301\u3061\u4e0a\u3052\u308b\u9ad8\u3055(mm)\u3002\u30bb\u30f3\u30b5\u306b\u3088\u308a\u8ddd\u96e2\u53d6\u3089\u306a\u3044\u3068\u691c\u51faOFF\u306b\u306a\u3089\u306a\u3044
samples_tolerance: 0.006 #\u30b5\u30f3\u30d7\u30eb\u9593\u306e\u8a31\u5bb9\u8aa4\u5dee(mm)\u3002\u30d0\u30e9\u30c4\u30ad\u304c\u3053\u306e\u5024\u3092\u8d85\u3048\u305f\u5834\u5408\u30ea\u30c8\u30e9\u30a4\u52d5\u4f5c\u3002
samples_tolerance_retries: 2 #\u30b5\u30f3\u30d7\u30eb\u306e\u8a66\u884c\u56de\u6570
z_offset: 1.2 #\u5024\u3092\u5897\u3084\u3059\u3068\u30ce\u30ba\u30eb\u304c\u30d9\u30c3\u30c9\u306b\u8fd1\u3065\u304f\u3002

\u30d7\u30ed\u30fc\u30d6\u5c0e\u5165\u8a73\u7d30\u306fEitoku\u3055\u3093\u306e\u4e0b\u8a18\u8a18\u4e8b\u53c2\u7167\u304c\u304a\u52e7\u3081\u3067\u3059\u3002
https://note.com/eitoku_note/n/n0dcc3f176f32

\u52a0\u901f\u5ea6\u30bb\u30f3\u30b5\u30fc\u3092\u4f7f\u3063\u305fKlipper\u306e\u8abf\u6574\u306b\u306fmoyashi\u3055\u3093\u306e\u4e0b\u8a18\u8a18\u4e8b\u304c\u304a\u52e7\u3081\u3067\u3059\u3002
http://hitoriblog.com/kingroon_kp3s/docs/tuning_klipper_using_an_accelerometer/

Klipper\u306eprinter.cfg\u691c\u8a0e\u5168\u4f53\u306b\u306f\u8cb4\u5fd7\u7523\u696d\u3055\u3093\u306e\u4e0b\u8a18\u8a18\u4e8b\u304c\u304a\u52e7\u3081\u3067\u3059\u3002
https://note.com/tcbjr8d/n/nf9b6892c5f1a

Sherpa-mini\u90e8\u5206\u306f Annex-Engineering \u3055\u3093\u4f5c\u6210\u306e\u8d85\u7d76\u7d20\u6575\u30a8\u30af\u30b9\u30c8\u30eb\u30fc\u30c0\u30fc\u3068\u306a\u308a\u307e\u3059\u30023D\u30c7\u30fc\u30bf\u306a\u3069\u5404\u7a2e\u30c7\u30fc\u30bf\u53c2\u7167\u3084\u518d\u5229\u7528\u3001\u518d\u914d\u5e03\u306a\u3069\u306b\u5bfe\u3057\u3066\u306f\u305c\u3072\u4e0b\u8a18\u3092\u3054\u53c2\u7167\u304f\u3060\u3055\u3044\u3002
\u30a2\u30fc\u30e0\u306f\u30b7\u30e7\u30fc\u30c8\u7248\u3092\u5229\u7528\u3059\u308b\u5fc5\u8981\u304c\u3042\u308a\u307e\u3059\u3002
https://github.com/Annex-Engineering/Sherpa_Mini-Extruder
https://store.annex.engineering/
https://discord.gg/MzTR3zE
https://github.com/Annex-Engineering/ANNEX-Engineering-License-Agreement/blob/main/LICENSE.md

","category":{"id":"2","path":[{"id":"1","name":"3D Printers","nameEn":"3D Printers","description":"Upgrading and improving your 3D printer couldn't be easier - no matter whether you're looking for functional or aesthetic modifications. Discover the best improvements.","__typename":"CategoryType"},{"id":"2","name":"Other Printer Parts & Upgrades","nameEn":"Other Printer Parts & Upgrades","description":"Customize your 3D printer with hundreds of enhancements! Download spool holders, camera mounts, LCD covers, fan shrouds and even the Lack enclosure!","__typename":"CategoryType"}],"__typename":"CategoryType"},"modified":"2023-07-02T05:44:32.082918+00:00","firstPublish":"2023-07-02T05:44:32.066135+00:00","datePublished":"2023-07-02T05:44:32.067787+00:00","dateCreatedThingiverse":null,"nsfw":false,"aiGenerated":false,"summary":"Lightweight print head to fix Dragon Hotend, Sherpa-mini, 3010 / 5015x2 Fan and Panasonic GX-H8A or B for Kingroon KP3S","likesCount":8,"makesCount":0,"liked":null,"printDuration":null,"numPieces":0,"weight":null,"nozzleDiameters":null,"usedMaterial":null,"layerHeights":null,"mmu":false,"materials":[],"dateFeatured":null,"downloadCount":37,"displayCount":825,"filesCount":7,"privateCollectionsCount":3,"publicCollectionsCount":6,"pdfFilePath":"media/prints/517947/pdfs/517947-print-head-fy41-for-kingroon-kp3s-a4202048-a3b9-482e-b89e-2c9ef096420b.pdf","commentCount":5,"userGcodeCount":0,"remixCount":0,"canBeRated":false,"addMakePermission":null,"printer":null,"image":{"id":"1996866","filePath":"media/prints/517947/images/4192510_655fa11f-3263-4360-93c3-639cec6dba16/pxl_20230625_222013581.jpg","rotation":0,"imageHash":"GQgGFIRTly6fZphnlpf0ihePeA==","imageWidth":2688,"imageHeight":1512,"__typename":"PrintImageType"},"images":[{"id":"1996866","filePath":"media/prints/517947/images/4192510_655fa11f-3263-4360-93c3-639cec6dba16/pxl_20230625_222013581.jpg","rotation":0,"imageHash":"GQgGFIRTly6fZphnlpf0ihePeA==","imageWidth":2688,"imageHeight":1512,"__typename":"PrintImageType"},{"id":"1996867","filePath":"media/prints/517947/images/4192511_00fd472c-5746-46d2-b9af-a5aef506c59c/pxl_20230625_222045651.jpg","rotation":0,"imageHash":"WRgKHIZfE6eMdod4l3eQiAeJeA==","imageWidth":2688,"imageHeight":1512,"__typename":"PrintImageType"},{"id":"1996868","filePath":"media/prints/517947/images/4192512_2db77a76-e0b5-4091-86a8-21b186fc95e2/pxl_20230626_232451117.jpg","rotation":0,"imageHash":"mxgKFIJnW5WfhXZ9dnyaYLcKVQ==","imageWidth":2688,"imageHeight":1512,"__typename":"PrintImageType"},{"id":"1996869","filePath":"media/prints/517947/images/4192513_40b70271-38f8-48db-963e-dd14e9983ec1/pxl_20230625_221534663.jpg","rotation":0,"imageHash":"GAgKDIJDe4l/hodmh3fylwhOiQ==","imageWidth":2688,"imageHeight":1512,"__typename":"PrintImageType"},{"id":"1996870","filePath":"media/prints/517947/images/4192514_e46b2bd0-bd1a-43ba-8ac4-0745b7c382d3/pxl_20230625_222120595.jpg","rotation":0,"imageHash":"GggSDIKfnHaMmHd4h3e5b4f5lQ==","imageWidth":2688,"imageHeight":1512,"__typename":"PrintImageType"}],"tags":[],"thingiverseLink":null,"filesType":null,"previewFile":{"id":"2214088","filePreviewPath":"media/prints/517947/stls/4192524_2c71e9f8-5d5c-4822-92dd-41fa0a65d42c/pusher-x-limit-kp3s-fy41-v8-export_preview.png","__typename":"STLType"},"license":{"id":"4","disallowRemixing":false,"__typename":"LicenseType"},"remixParents":[{"id":"326557","modelId":"517931","modelName":"Print head fy36 for Kingroon KP3S","modelAuthor":{"id":"148286","handle":"YoheiFukuma_148286","verified":false,"publicUsername":"Yohei Fukuma","__typename":"UserType"},"model":{"id":"517931","name":"Print head fy36 for Kingroon KP3S","slug":"print-head-fy36-for-kingroon-kp3s","datePublished":"2023-07-02T04:59:24.247458+00:00","image":{"id":"1996829","filePath":"media/prints/517931/images/4192386_1062eddb-a98a-498d-8d5a-be9b21b15cab/pxl_20230702_025627747.jpg","rotation":0,"imageHash":"GQgOBIDzaYl6Z4l3dqgMrfIjiA==","imageWidth":2688,"imageHeight":1512,"__typename":"PrintImageType"},"club":false,"authorship":"remix","license":{"id":"4","name":"Creative Commons \u2014 Attribution \u2014 Noncommercial \u2014 Share Alike","disallowRemixing":false,"__typename":"LicenseType"},"eduProject":null,"__typename":"PrintType"},"url":null,"urlAuthor":null,"urlImage":null,"urlTitle":null,"urlLicense":null,"urlLicenseText":null,"__typename":"PrintRemixType"}],"remixDescription":null,"__typename":"PrintType","priceBeforeSale":null,"user":{"id":"148286","handle":"YoheiFukuma_148286","verified":false,"dateVerified":null,"publicUsername":"Yohei Fukuma","avatarFilePath":"media/auth/avatars/87/878b9abb-897d-492f-b33a-3c9352f34dec.jpg","badgesProfileLevel":{"profileLevel":8,"__typename":"BadgesProfileLevelType"},"__typename":"UserType","isFollowedByMe":false,"isHiddenForMe":false,"canBeFollowed":true,"billingAccountType":"personal","lowestTierPrice":null,"highlightedModels":{"models":[{"id":"517963","name":"Kingroon KP3S full assembly STP/OBJ data","slug":"kingroon-kp3s-full-assembly-stpobj-data","ratingAvg":"5.0000000000","likesCount":47,"liked":null,"datePublished":"2023-07-02T06:30:42.804641+00:00","dateFeatured":null,"firstPublish":"2023-07-02T06:20:19.945874+00:00","downloadCount":372,"mmu":false,"category":{"id":"40","path":[{"id":"1","name":"3D Printers","nameEn":"3D Printers","__typename":"CategoryType"},{"id":"40","name":"Accessories","nameEn":"Accessories","__typename":"CategoryType"}],"__typename":"CategoryType"},"modified":"2023-07-02T06:30:42.819333+00:00","image":{"id":"1996943","filePath":"media/prints/517963/images/4192697_71d7b4d9-64b0-479b-adcc-d4eaf6a9cb5e/large_display_ss_kp3s3_17_517963.jpg","rotation":0,"imageHash":"MQgWBwD3WXeJd4eId5d4h3eHilBnC4QE","imageWidth":800,"imageHeight":821,"__typename":"PrintImageType"},"nsfw":false,"aiGenerated":false,"club":false,"price":null,"priceBeforeSale":null,"user":{"id":"148286","handle":"YoheiFukuma_148286","verified":false,"dateVerified":null,"publicUsername":"Yohei Fukuma","avatarFilePath":"media/auth/avatars/87/878b9abb-897d-492f-b33a-3c9352f34dec.jpg","badgesProfileLevel":{"profileLevel":8,"__typename":"BadgesProfileLevelType"},"__typename":"UserType","isHiddenForMe":false},"latestContestResult":null,"__typename":"PrintType"},{"id":"72268","name":"Simple Tool holder for Prusa MINI","slug":"simple-tool-holder-for-prusa-mini","ratingAvg":"4.1428571429","likesCount":17,"liked":null,"datePublished":"2021-07-24T07:56:26.644957+00:00","dateFeatured":null,"firstPublish":"2021-07-24T07:56:26.644957+00:00","downloadCount":99,"mmu":false,"category":{"id":"40","path":[{"id":"1","name":"3D Printers","nameEn":"3D Printers","__typename":"CategoryType"},{"id":"40","name":"Accessories","nameEn":"Accessories","__typename":"CategoryType"}],"__typename":"CategoryType"},"modified":"2021-07-25T04:55:17.733629+00:00","image":{"id":"411201","filePath":"media/prints/72268/images/784466_7ad8a515-f23e-4586-9dc1-233dd7e6b721/rx509015.jpg","rotation":0,"imageHash":"mRgKFIJvZkZViIZliIyAngzJyQ==","imageWidth":1280,"imageHeight":719,"__typename":"PrintImageType"},"nsfw":false,"aiGenerated":false,"club":false,"price":null,"priceBeforeSale":null,"user":{"id":"148286","handle":"YoheiFukuma_148286","verified":false,"dateVerified":null,"publicUsername":"Yohei Fukuma","avatarFilePath":"media/auth/avatars/87/878b9abb-897d-492f-b33a-3c9352f34dec.jpg","badgesProfileLevel":{"profileLevel":8,"__typename":"BadgesProfileLevelType"},"__typename":"UserType","isHiddenForMe":false},"latestContestResult":null,"__typename":"PrintType"},{"id":"517965","name":"Simple hex bit holder","slug":"simple-hex-bit-holder","ratingAvg":"0","likesCount":13,"liked":null,"datePublished":"2023-07-02T06:33:42.762343+00:00","dateFeatured":null,"firstPublish":"2023-07-02T06:13:57.882336+00:00","downloadCount":57,"mmu":false,"category":{"id":"49","path":[{"id":"48","name":"Hobby & Makers","nameEn":"Hobby & Makers","__typename":"CategoryType"},{"id":"49","name":"Tools","nameEn":"Tools","__typename":"CategoryType"}],"__typename":"CategoryType"},"modified":"2023-07-02T06:33:42.780016+00:00","image":{"id":"1996950","filePath":"media/prints/517965/images/4192709_cdd8cf70-6d2a-472e-8c5b-a9b6f26e33b5/large_display_rx508313_1440_517965.jpg","rotation":0,"imageHash":"nygKFIKoppZ/eHd8hmbveP1/6A==","imageWidth":1024,"imageHeight":575,"__typename":"PrintImageType"},"nsfw":false,"aiGenerated":false,"club":false,"price":null,"priceBeforeSale":null,"user":{"id":"148286","handle":"YoheiFukuma_148286","verified":false,"dateVerified":null,"publicUsername":"Yohei Fukuma","avatarFilePath":"media/auth/avatars/87/878b9abb-897d-492f-b33a-3c9352f34dec.jpg","badgesProfileLevel":{"profileLevel":8,"__typename":"BadgesProfileLevelType"},"__typename":"UserType","isHiddenForMe":false},"latestContestResult":null,"__typename":"PrintType"},{"id":"72269","name":"Fan mounter for SUNLU 3D Filament Dryer Box S1","slug":"fan-mounter-for-sunlu-3d-filament-dryer-box-s1","ratingAvg":"5.0000000000","likesCount":13,"liked":null,"datePublished":"2023-07-02T06:32:59.068054+00:00","dateFeatured":null,"firstPublish":"2021-07-24T08:27:45.590871+00:00","downloadCount":58,"mmu":false,"category":{"id":"40","path":[{"id":"1","name":"3D Printers","nameEn":"3D Printers","__typename":"CategoryType"},{"id":"40","name":"Accessories","nameEn":"Accessories","__typename":"CategoryType"}],"__typename":"CategoryType"},"modified":"2023-07-02T06:32:59.086969+00:00","image":{"id":"411204","filePath":"media/prints/72269/images/784469_2235fa61-c7f7-4c57-bcb3-b9673b4d4a76/large_display_rx508919_72269.jpg","rotation":0,"imageHash":"2QcGDICfdkrLc2pxhnePmeyc+A==","imageWidth":1024,"imageHeight":575,"__typename":"PrintImageType"},"nsfw":false,"aiGenerated":false,"club":false,"price":null,"priceBeforeSale":null,"user":{"id":"148286","handle":"YoheiFukuma_148286","verified":false,"dateVerified":null,"publicUsername":"Yohei Fukuma","avatarFilePath":"media/auth/avatars/87/878b9abb-897d-492f-b33a-3c9352f34dec.jpg","badgesProfileLevel":{"profileLevel":8,"__typename":"BadgesProfileLevelType"},"__typename":"UserType","isHiddenForMe":false},"latestContestResult":null,"__typename":"PrintType"},{"id":"517961","name":"Holder PSU for Kingroon KP3S","slug":"holder-psu-for-kingroon-kp3s","ratingAvg":"5.0000000000","likesCount":12,"liked":null,"datePublished":"2023-07-02T06:31:13.867006+00:00","dateFeatured":null,"firstPublish":"2023-07-02T06:18:22.086014+00:00","downloadCount":125,"mmu":false,"category":{"id":"2","path":[{"id":"1","name":"3D Printers","nameEn":"3D Printers","__typename":"CategoryType"},{"id":"2","name":"Other Printer Parts & Upgrades","nameEn":"Other Printer Parts & Upgrades","__typename":"CategoryType"}],"__typename":"CategoryType"},"modified":"2023-07-02T06:31:13.882567+00:00","image":{"id":"1996928","filePath":"media/prints/517961/images/4192672_3f104d12-ff6f-4e0d-923f-e4b797d80436/large_display_rx508660_517961.jpg","rotation":0,"imageHash":"YggOHIT3ZHlqVohnhnavYfgKhg==","imageWidth":1024,"imageHeight":575,"__typename":"PrintImageType"},"nsfw":false,"aiGenerated":false,"club":false,"price":null,"priceBeforeSale":null,"user":{"id":"148286","handle":"YoheiFukuma_148286","verified":false,"dateVerified":null,"publicUsername":"Yohei Fukuma","avatarFilePath":"media/auth/avatars/87/878b9abb-897d-492f-b33a-3c9352f34dec.jpg","badgesProfileLevel":{"profileLevel":8,"__typename":"BadgesProfileLevelType"},"__typename":"UserType","isHiddenForMe":false},"latestContestResult":null,"__typename":"PrintType"},{"id":"517958","name":"Lightweight 4010/5015 fan and 3DTouch mounter for Kingroon KP3S","slug":"lightweight-40105015-fan-and-3dtouch-mounter-for-k","ratingAvg":"0","likesCount":11,"liked":null,"datePublished":"2023-07-02T06:35:12.966396+00:00","dateFeatured":null,"firstPublish":"2023-07-02T06:15:34.646098+00:00","downloadCount":53,"mmu":false,"category":{"id":"2","path":[{"id":"1","name":"3D Printers","nameEn":"3D Printers","__typename":"CategoryType"},{"id":"2","name":"Other Printer Parts & Upgrades","nameEn":"Other Printer Parts & Upgrades","__typename":"CategoryType"}],"__typename":"CategoryType"},"modified":"2023-07-02T06:35:12.984594+00:00","image":{"id":"1996905","filePath":"media/prints/517958/images/4192642_af740111-95e9-4f40-88f2-580970fa34f1/large_display_rx508962_517958.jpg","rotation":0,"imageHash":"nRgGFILAR35Iqqqcx7n5i3yf2Q==","imageWidth":1024,"imageHeight":575,"__typename":"PrintImageType"},"nsfw":false,"aiGenerated":false,"club":false,"price":null,"priceBeforeSale":null,"user":{"id":"148286","handle":"YoheiFukuma_148286","verified":false,"dateVerified":null,"publicUsername":"Yohei Fukuma","avatarFilePath":"media/auth/avatars/87/878b9abb-897d-492f-b33a-3c9352f34dec.jpg","badgesProfileLevel":{"profileLevel":8,"__typename":"BadgesProfileLevelType"},"__typename":"UserType","isHiddenForMe":false},"latestContestResult":null,"__typename":"PrintType"},{"id":"517947","name":"Print head fy41 for Kingroon KP3S","slug":"print-head-fy41-for-kingroon-kp3s","ratingAvg":"0","likesCount":8,"liked":null,"datePublished":"2023-07-02T05:44:32.067787+00:00","dateFeatured":null,"firstPublish":"2023-07-02T05:44:32.066135+00:00","downloadCount":37,"mmu":false,"category":{"id":"2","path":[{"id":"1","name":"3D Printers","nameEn":"3D Printers","__typename":"CategoryType"},{"id":"2","name":"Other Printer Parts & Upgrades","nameEn":"Other Printer Parts & Upgrades","__typename":"CategoryType"}],"__typename":"CategoryType"},"modified":"2023-07-02T05:44:32.082918+00:00","image":{"id":"1996866","filePath":"media/prints/517947/images/4192510_655fa11f-3263-4360-93c3-639cec6dba16/pxl_20230625_222013581.jpg","rotation":0,"imageHash":"GQgGFIRTly6fZphnlpf0ihePeA==","imageWidth":2688,"imageHeight":1512,"__typename":"PrintImageType"},"nsfw":false,"aiGenerated":false,"club":false,"price":null,"priceBeforeSale":null,"user":{"id":"148286","handle":"YoheiFukuma_148286","verified":false,"dateVerified":null,"publicUsername":"Yohei Fukuma","avatarFilePath":"media/auth/avatars/87/878b9abb-897d-492f-b33a-3c9352f34dec.jpg","badgesProfileLevel":{"profileLevel":8,"__typename":"BadgesProfileLevelType"},"__typename":"UserType","isHiddenForMe":false},"latestContestResult":null,"__typename":"PrintType"},{"id":"517962","name":"Low hight spool-holder v23 for Kingroon KP3S, Aquila & Ender3","slug":"low-hight-spool-holder-v23-for-kingroon-kp3s-aquil","ratingAvg":"0","likesCount":7,"liked":null,"datePublished":"2023-07-02T06:31:52.085688+00:00","dateFeatured":null,"firstPublish":"2023-07-02T06:17:40.726321+00:00","downloadCount":63,"mmu":false,"category":{"id":"135","path":[{"id":"1","name":"3D Printers","nameEn":"3D Printers","__typename":"CategoryType"},{"id":"135","name":"Creality Parts & Upgrades","nameEn":"Creality Parts & Upgrades","__typename":"CategoryType"}],"__typename":"CategoryType"},"modified":"2023-07-02T06:31:52.103674+00:00","image":{"id":"1996933","filePath":"media/prints/517962/images/4192681_b37adb61-2fcf-49b4-b17c-6275ecf5b9d3/large_display_horizon_0001_burst20211207152259961_cover_1920_517962.jpg","rotation":0,"imageHash":"VRgKDIJnmXZvhmiYmIbXQVAMAQ==","imageWidth":1024,"imageHeight":576,"__typename":"PrintImageType"},"nsfw":false,"aiGenerated":false,"club":false,"price":null,"priceBeforeSale":null,"user":{"id":"148286","handle":"YoheiFukuma_148286","verified":false,"dateVerified":null,"publicUsername":"Yohei Fukuma","avatarFilePath":"media/auth/avatars/87/878b9abb-897d-492f-b33a-3c9352f34dec.jpg","badgesProfileLevel":{"profileLevel":8,"__typename":"BadgesProfileLevelType"},"__typename":"UserType","isHiddenForMe":false},"latestContestResult":null,"__typename":"PrintType"}],"featured":false,"__typename":"HighlightedModelsType"},"designer":false,"stripeAccountActive":null,"membership":null},"contests":[],"contestsResults":[],"prusameterPoints":null,"latestContestResult":null}}}